The True North angle is stored in the project base point....simply access it and set it to the angle on the north arrow symbol. Its easy!
Follow the steps below
1. create a north arrow family that has an angle parameter called "Angle to True North"
2. Place the north arrow family on a plan view that has the Project North orientation displayed
3. Turn on the Project Base Point on the plan view
2. open DynamoBIM and place the following nodes shown in the image below
This is a "simple" method to get one north arrow to align with one plan view.
If you wanted to perform this on multiple sheets then you would have to select the north arrows by family type not by "select model element" and same is true for the project basepoint.
If you dont like the method above then you could always rotate the north arrow manually.